HanRui Cutting Picks

Cold Planer Picks HanRui Wear Parts Skpe: rachel-syt Email: sales@hrmachineryparts.com https://www.heavydutywearparts.com/cutting-picks/ Part Number: 222-7570 holder matching:  heavy duty （ 3/4’’ shank ） Application ： Caterpillar cold planers RM-350B, RM500B  PM310, PM822, PM820, PM825, PM312LRC, PM313LRC  15 TO 18 LITER C18  PM622, PM-102, PM620, PM312, PM313, PM-200, PM310, PM-201  Caterpillar stabilizers/reclaimers RM-500, RR-250B  Wear Abrasion: All parts of a cutting pick are more or less subject to wear, depending on the material to be ground. Excessive fatigue on a part (such as carbide tip, steel body, wear) plate and / or clamping sleeve, should be replaced to prevent or reduce the corresponding damage, more expensive tool holder system This is also a more complicated replacement. Dirt, unrelated Different manufacturers' T installations or components are not the same, which not only reduces productivity and/or milling performance, but can even c

Cold Planer Teeth HanRui Wear Parts Skpe: rachel-syt Email: sales@hrmachineryparts.com https://www.heavydutywearparts.com/cutting-picks/ HR road planer picks are designed for optimum performance in different kinds of materials. Tungsten coated teeth body & tungsten carbide tips provide longwe wear life and lower costs in operation Application for caterpillar cold planer COLD PR-450C, PM822, PM622, PM310, PM-565, PR-1000, PM-565B, PM820, PR-1000C PM620, PM-465, PM-201 WKTL PC305B, SW360B, PC404, PC412B, T9, PC310B, SW45, PC210, T9B, PC205, SW460B, T6B, PC306B, PC408B, T15, SW345B, PC206, PC204, PC104B, PC205B, T15B, PC203, SW60 CAT Rotary mixer Road reclaimer RRSS RM-350B, SM-350, RM-350, RM-500, RR-250B, RM-250C, SS-250B, RR-250, SS-250, RM500B, RM-300 CUTTER TEETH CODE:  222-7571  holder matching:  low horse power (3/4’’ shank) 140-2864  holder matching: heavy duty （ 3/4’’ shank ） 238-3191  holder: full bodied-washered （ 3/4’’ shank ） Teet

Road Milling Teeth HanRui Wear Parts Skpe: rachel-syt Email: sales@hrmachineryparts.com https://www.heavydutywearparts.com/cutting-picks/ Part Number:  227-7340 Holder matching:   low horse power (3/4’’ shank) Application:  Caterpillar Road construction machinery: WKTL PC404, PC306B, PC204, SW60, PC205B, SW345B, PC206, PC305B, PC408B, SW460B, PC210, PC412B, PC310B, SW360B, PC205, PC203, SW45, PC104B. Maintenance notice: The most common causes of exceptionally short service life include the accumulation of cladding and old abrasives, usually from ineffective cleaning. The water supply system has insufficient water supply in the grinding drum housing How to avoid wear of the milling teeth? Wear is not completely prevented on the raft, but it is best to minimize it. Adequate water supply is an important prerequisite for ensuring the necessary rotation. Choosing the right choice (depending on the substrate to be ground) also optimizes use and reduces wear. How to

Road Planing Bits HanRui Wear Parts Skpe: rachel-syt Email: sales@hrmachineryparts.com https://www.heavydutywearparts.com/cutting-picks/ Part Number: 149-5763 Application: Caterpillar road pavers WKTL  PC6, PC3, PC9, PC4 Relation between welding & heat treatment: The carbide tip is firmly brazed to the steel body. When the extremely high temperature generated during the milling process acts on the part, the carbide and steel on the tip of the needle act. The road planing bit is affected by differential expansion. The self-developed brazing method determines the hardness of the picking head under the action of heat. This is a secret test through a lot of stress: even under the huge stress, there will be no breakage. The carbide tip is firmly bonded to the steel body. High impact resistance: The truncation must withstand large shear and impact stresses. At the same time, the cutting pick must be placed firmly and securely on the shank throughout its service

Soil Stabilizer Bit HanRui Wear Parts Skpe: rachel-syt Email: sales@hrmachineryparts.com https://www.heavydutywearparts.com/cutting-picks/ Part Number : 117-3884 Asphalt & soil stabilizer bit   ( 8/7’’ shank ) 117-8335 (hardfacing) ( 8/7’’ shank ) Tooth holder weld on stabilizer & reclaimer : 117-4076 Quick change holder:  117-3887 195-7244 113-0311 113-0312  holder 113-0313 WAsher 8C1856 COLD PLANERPR-1000C PR-1000  Left 077-7343 Right 077-4727 (carbide face) Hardened steel 077-2775 077-2776 Quick change road milling tools:  077-4018(carbide face) Application: Caterpillar stabilizer road construction machinery:  SS-250B, RM-350, RM-350B, RR-250, SM-350, RM-300, RM-250C, RR-250B, SS-250  077-2820 hardened steel: 077-2820 Block bit: 077-2807 Application Caterpillar SS-250  RR-250  tooth holder: 077-2789 WIRTGEN Road construction equipments application: W6C/25 W8/25 W1-13/22 W1-17/22 W1-13-S/25 W1-15-S/25 W1-15/25 W1-19/25 WSM1-13-77/

Continuous Miner Teeth HanRui Wear Parts Skpe: rachel-syt Email: sales@hrmachineryparts.com https://www.heavydutywearparts.com/cutting-picks/ Introduction Nickname: coal mining bits coal cutting picks Machine Type: Drilling Machine/Mining machine/continuous miner/tunnel machine Processing type: Forging Tip material: High quality carbide Application: Underground mining Operation type: drill bit HR cutting picks could replace usage of many popluar and famous brands. KENNAMETAL pick reference:TS2, TS4, TS8, TS11, TS20, TS21, TS26, C4/U43H, TH3S, TH3, TS3, TS7, TS10, TS15, TS17, TS18, TS19, TS25, TS30, TS31, TS32, TS5, TS9, TS14, TS16, TS33, TS34, TS3C, TS13C, TS19C, TS5C, TS14C, TS16C, TS28C, TS29C, C4, C4-1, C6, C7, T6, T7, T12, T14, T1, T5,KSM5TS5X TS5CX TS7X TS7CX TS8X TS8CX TS14X TS14CX TS19X TS19CX TS20X TS20CX  KENNAMETAL :TS2, TS4, TS8, TS11, TS20, TS21, TS26, C4/U43H, TH3S, TH3, TS3, TS7, TS10, TS15, TS17, TS18, TS19, TS25, TS30, TS31, TS32, TS5, TS9, T

Rock Milling Picks HanRui Wear Parts Skpe: rachel-syt Email: sales@hrmachineryparts.com https://www.heavydutywearparts.com/cutting-picks/ Rock cutter teeth, rock milling bits, rock cutter picks, Rock cutting picks The quality of the pick depends on the quality of the carbide tip, the quality of the handle shank, the welding material and technology, the heat treatment process, the machining accuracy and the mechanical design. HR facilities ensure economical production methods and on-time deliveries as well as high quality products.We offer round shank picks with inserts from 8 to 30 mm and shaft diameters from 10 to 38 mm. A full range of head designs, retainer systems and inserts is available for your specific requirements. Customised picks can be manufactured upon request. HR supply wide range of cutting picks which could be comparable with KENNAMETAL, BETEK , WIRTGEN ORIGINAL. BETEK PICK, ROCK CUTTING TOOLS CROSS REFERENCE: BETEK :BKS111,BKS112,BTK62,BTK29,BTK63,B

Trenching Cutter Pick HanRui Wear Parts Skpe: rachel-syt Email: sales@hrmachineryparts.com https://www.heavydutywearparts.com/cutting-picks/ HR is a international productions base of series of bullet trenching bit, shield cutters, TBM cutters, auger bits, mining picks, anflats picks, holder and rock drilling tools ect. more over HR could make it according to codes of Kennametal , Betek, Sandvik. Or we produce the products according to clients' technical drawings. The products include different kinds of round cutter bits and flat cutter bits for excavate coal machine as the replacements of kennametal. Such as Wirtgen, Sandvik and coal bolting bit and coal bolting rod. HR have exported our products to UK, italy, Peru, Korea, Japan, Taiwan, Singapore, etc Product Name: Coal mining tools   Description: rock drilling tools, construction drilling tools, mining tools, road milling tools, shield cutters and other related products. Material: Tip carbide steel

Carbide Tipped Picks HanRui Wear Parts Skpe: rachel-syt Email: sales@hrmachineryparts.com https://www.heavydutywearparts.com/cutting-picks/ We can supply following similar items: Steel body of pick:  42CrMo, BZ-30 HRC 40-44 Cabide: YG11C YG13C Heat treatment: Medium frequency induction brazing Wear solution: Tungsten coating 1.Kennametal Road Rehabilitation RP01 RP06 RP05 PR07 RP19 RP20 RP23 RP26 RP10 RP11 RP12 RP13 RP15 RP16 RP17 RP18 RP24 RP25 RP27 RP28 RP30 RP31 RP21 RP22 RPM10 RPM18 RS19D RS18 RZ05 RZ07 RZ08 RZ19 RZ20 RZ16 RZ24 RZ25 M1 M2 M3 M4 K6 C3KBF RS01 RS04 RS06 RS10 RS12 RS19 RS20 RS14 RS16 RS18 RW01 RL03 RL06 RL07 RL08 RL09 RL10 RL11 SR01 SR02 SR03 SR04 SM01 SM02 SM03 SM04 SM06 SM07 F3 F4 K7 C3KBFVS RS08 RS02 RS05 RS07 RS13 RS25 RS15 RS17 C3KLRVS RL02 RL04 RL06W RL07W RW01W CS2 CM41 CM42 CMB4 CM61 CM63 CMB6 CMB6L 2.Block and holder KPF201 BLOCK KPF200 BUSHING KPF301 BASE KPF301 SLEEVE KPF400 BLOCK KPF400 BASE QC100 BASE QC110HD BLOCK QC110B B